Little help please

Man I checked majority of topics on here and read ton but I believe there is something wrong here. I have Auxbeam led bar wires. The switch wires that come with auxbeam wiring are black, yellow and red. I hooked those wires to CH4x4 switch but here is my dilema.

black wire from switch to black on auxbeam cable
green from switch to red on auxbeam cable
first red from switch to yellow on auxbeam

the second red on switch i hooked up to green wire on rear window switch.

With this set up i can turn on led bar on and off but the switch light is on even if i unhook the second red from green from rear window.

I tried switching the wires this way.

black to black
red to red
green to yellow

I can turn on led bar but the switch is not on anymore and than if I connect the second red from switch to green wire on rear window switch it is still not lid up even if the low beams are on.

Here are couple pics.

 

Hope this helps...
https://www.tacomaworld.com/threads/ch4x4-toyota-push-switch-and-auxbeam-wire-harness.528088/