3rd Gen Tacoma OME Lift Questions/Answers

I am looking to buy a OME lift, I have been reading on the forum and have been doing my research and have a question.. You guys with this lift have you experienced any vibration coming from the diff? Or did you just knock the factory diff bearing out and went with ECGS when you did the lift? Thank you in advance.

 

Just to the ECGS Bushing at the same time as the lift...you'll either need it right away or sooner than later

Hodakaguy

 

Running my ome lift with no issues. I did buy the ecgs just to do but didnt need. I saw install lift and go from there. Also dont do lift and tiresat same time you wont know which one is the cause if something goes wrong

 

Seen this guys build thread it's impressive he knows what he is talking about.

 

I installed the ECGS bushing while installing the OME lift.
It's cheap and expected to last a very long time, so you might as well do it while you have everything apart.

 

Did the lift and got the vibes....then had to pull it apart to do the bushing. Order it and do it the same time...