4 inch spindles and coil overs

Anyone did a 4”inch spindle lift with coil overs jacked up 3” to make it a 7” inch lift would I have any alignment problems ? whit a 2WD I no my truck not a 4x4 But it’s all I can afford right now.

 

@SpruceTaco did. You may have to get new ucas if you want to go up that high.

 

I got Aftermarket UCAS but it’s for 4” do u think that will work?

 

What uca do you have?

 

The freedom Offroad uca

 

You should be good to go. Nice thing about spindles is they retain factory geometry of the suspension. So when you add a coilover lift then you start to change things. So if you go 2.5-3" on your coilover you need to move the caster forward to get the wheel away from the cab

 

These are the 4”inch spindles that I want to install

 

I have the spindles on my 3rd gen with icon 2.5 coil overs set about 1.5 inches extra. My front sits at about 5 inches and I have stock uca's. The alignment is the greatest as it is maxed out. Since the freedom OR uca are not adjustable, you may run into the same issue with the alignment being maxed.
Edit.... maybe @eccracer104 can give some clarity.

 

Thank you for the information