Blazing Blue Packmule

I don’t normally do a “build” thread but I figured someone around here would appreciate some of the feedback I’ve learned about some 3rd gen products.

This is my second 3rd gen Tacoma, I briefly owned a 2016 AT TRDOR LB and just never got the warm and fuzzy feeling from it. After a year of not owning a Tacoma I decided I wanted another and after hunting for a second gen I found myself in a 2017 MT TRDOR SB. Being able to find my own gears slowly won me over and I figured it was time to “build” my Tacoma.

Here’s a brief run down of the specs.

Suspension:

OME BP-51’s

Total Chaos UCA’s

Cab Mount Chop

1” driver side adjustment-3/4” passenger side.

Armor/Recovery:

ARB Safari Bumper

ARB Safari Bars

ARB Sliders

ARB UVP Kit (Under Vehicle Protection)

Warn ZEON 10S

Factor 55 Flatlink

4x MAXTRAX

Prinsu Rack (MAXTRAX mounted)

Miscellaneous recovery gear

Wheels/Tires:

SCS Ray 10’s Black 17”
Toyo Open Country AT’s 285/70/17

Lighting:
6.7” Vision X Transporter 18 LED (Bumper Mounted)

45” Vision X XPR-S Lightbar (Roof Mounted on Prinsu)

BAJA Designs S2 Pro’s (Roof Mounted on rear of Prinsu)


Miscellaneous Mods:

TRD Sport Hood (Skewp)

TRD PRO Taillights

TRD Exhaust

TRD PRO Grille

Clazzio Leather Seat Covers

Switch Pro’s 8100

ARB Dual compressor on SLEE Mount under hood

There’s a list of “oncoming” mods and I’ll update this thread when I get them done!

 

Saved

 

Clean bumper and truck. What are your BP-51 settings for compression and rebound with that added weight?

 

ARB and BP-51's... Sexy!