Correct position for the two parts of the detent spring?

Can anyone please tell me if this is the correct position for the two parts of the detent spring on a 2008 tacoma 4.0 auto transmission? The picture is taken from the driver side and the filter is removed. Any help would be greatly appreciated.

 

Bottom view.

 

This is a shot before the bolt was snugged. After it was snugged, the rounded part of the spring that goes into the notched piece that moves when you move the gear selector [far left in the picture] was full contact, or seated in the notch [in this case the park position notch].

 

There is a member here on TW that knows a lot about transmissions, he might be able to answer your question. @gearcruncher

 

looks good to me

https://www.youtube.com/watch?time_continue=85&v=P1XdzmjdsPo

https://www.tacomaworld.com/threads/ratiotek-transmission-upgrade-how-to.528378/#post-16878478

https://www.tacomaworld.com/threads...th-pics-for-second-gen-4-liter-trucks.289913/

 

Thank you very much.