Trying to put 31" tires on my 2015

trying to put 31" tires on my tacoma and its lifted 2.75 in the front and 1.5 in the back. I tried the tires and they rub on the front so if i putt a 3' lift on front and back do you guys think it will still rub.

 

Just get a heat gun and bend the inner plastic a bit. Or is there too much rubbing?

 

Well it has that metal square thing behind the front tires and thats what it rubs on also i got the 15 rims free from a buddy and im not sure what the off set is on them so i know that throws off the tires too

 

I had/have no rubbing with my 31.65's... 265/75r16

https://www.tacomaworld.com/tirecalc?tires=245-75r16-265-75r16

That was at stock ride height as well.

 

Do you have wheel spacers or wheels with a lot of offset (wide track)?

 

Do a little and they'll fit with no rubbing

 

Git yer cab mount chop plates here!

https://kore-4x4.com/products/cab-mount-chop-cmc-plate

 

Got a front to back shot?

 

Your aftermarket wheels change your offset, you need to check your caster when you do a wheel alignment, try to get it around 2.

 

get rid of the little plastic flaps on the front by the wheels