What Have You Done To Your 2nd Gen Tacoma Today?

Morimoto XB fogs. Plug and play. Blacked out and would compliment your headlights nicely. Here's mine, so you can have an idea of how they look:

 

Those are sweet! Going to have to get a set!

 

I’m happy with them, way better than my HID kit!

 

I still have to do the wiring, but I mounted my 100 watt solar panel today. It is a tight fit, but I think it will work just fine. The panel sits below the bars but clears the roof. So in a pinch, I can still mount items over the panel and not have them touch/rub.

 

Nice! Clean fitment

 

Link to panel???

 

Renogy Solar Panel, Single

https://www.amazon.com/Renogy-Watts...=1520390764&sr=8-2&keywords=renogy+100w+panel

Here you go. Ive got the same one on my truck. Mines a renogy. Not sure if his is different, but mine is also 100w

 

I love mine so I definitely recommend them.

 

Yep, same panel, I got the "starter kit" with a 30A Wanderer (non-LCD) controller. @rjbiii where did you mount your charge controller?

$130 Renogy 100 Watt 12 Volt Solar Panel Starter Kit with 100W Monocrystalline Solar Panel + 30A PWM Charge Controller + Adaptor Kit + Tray Cables + Mounting Z Brackets for RV Boats Trailer Off-Grid System

https://www.amazon.com/gp/product/B00BFCNFRM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

 

I mounted mine inside an old box that came off of a feeder that i had laying around the ranch. I put mine inside the bed on right by the bedside cubby on the driver side. Its in the box to the left of the inverter in the top picture. Mine specified that it needed to be mounted vertically so it took me a while to figure out how i wanted to do it and finally decided on this. Its been working great for the past 6-8 months

 

So I have a deep cycle battery in my bed I have for some accessories/charging- what do you hook up your panel to? Do you have a write up? Same for @OneFastGeek

 

Im running a standalone 31M northstar deep cycle battery. I use it primarily to run my fridge all the time and it never has trouble keeping up.

Link to write up here: https://www.tacomaworld.com/threads/rjbiiis-turtle-timberland-mica-build-bs.492123/#post-15306079

Ive changed quite a bit of it and cleaned it all up since then, but thats the basic setup that i went with!

 

Nice! I'd be afraid some douche would try and steal it, or some punk kid taking a rock to it.

 

I have a deep cycle, dual battery setup under the hood. I haven’t wired the solar panel yet, but I’ll try to post something helpful when it’s done. The plan is to connect it to the house battery. I’m hoping that on a nice sunny day, it’ll produce enough juice to make my ML-ACR take notice and auto link the batteries so they can both charge.

I like to think it won’t be very noticeable unless someone is being nosy about my truck to begin with, but time will tell.

 

That’s awesome I’ve been thinking about that for a wile, but wasn’t sure about the fit/clearance

 

What lift and tire size?

 

go flex cell if you concerned about thickness, its about 1/4 cm. I get a charge even under cloud cover for both of my agm yellows

 

Do you have a thread about the solar and how it's set up it looks sick

 

other than a short explanation and few photos in my build thread, it wasnt very well documented. Solar installs are straight forward.