What Have You Done To Your 2nd Gen Tacoma Today?

This is my trucks current setup..

Front: Bilstein 5100 & OME 885
Rear: 1.5" AAL
Tires: 285/75/16 BFG KM2
Steps: Nfab
Tint: 5% All Around
Exhaust: Single in Dual out Flowmaster 40


I'm itching to do more but prefer a simple look with the stock wheels and such. I trail ride and camp a lot.. any suggestions TW?!

 

Nice, maybe its time for me to take my truck in as well if they're giving out tacomas. Which dealership gave you that? Any pics of your frame? My frame may not be bad enough yet since i've magnet painted it a couple of years ago.

 

Plasti-Dip the rims black. It'll last for years and can be removed pretty easily.

 

Shoot me a PM if you ever need help I’ll point you in the right direction.

 

Plastidipped my chrome honeycomb grill and front emblem

 

You should jump it!

Do you even dirt bro?

 

Will do, thanks man!

 

Installed Dakar leaf springs, replaced the OME 884 with 887 and new top hats. Tried to get it alignmed at Toyota with my lifetime alignment and they said I have to wait a month because I got on done in November and they will only do it every 6 months. All the tabs we're put back so the alignment isnt off to much. Just sucks that Toyota is such a bitch about stuff like that, I mean who really going to abuse free lifetime alignments, they take you vehicle for practically an entire day....

 

Just got back from Fastenal a little bit ago with my SOS Offroad skids. @EddyRRT knocked it out of the park again! Now to prep, paint, and mount these bad boys before I fly out next weekend!

IMG_7806 by lmarshall73, on Flickr

 

Recovery Points front and rear? On my list of cheep and easy mods.

 

Question about your antenna mount and grinding off the paint, dosen't the white washers isolate the antenna mount from the mounting bracket anyway? I'm about to install CBI hood mounts on my 13' and need to figure this out.

 

Only on one side

 

So I need to grind off the paint only on the side opposite the isolation washer?

 

Did you get/need new UCA’s?

 

I believe so. Any time I've used a Fire Ring I've also used a stainless mount, so I've never had to worry about sanding the mount itself, only between the mount and bodywork.

 

You parting with the 884’s? Im in the market.

 

Whichever side the fire-ring makes metal-metal contact depending on how you mount it per the diagram they give you (above or below mount). There is a metal rim on the ring that grounds to the mount basically.

 

Thank you!

 

No I have stock UCA's... Excuse my noobness but what do aftermarket UCA's do?

 

Make a huge dent on your wallet.