Cruise Control Issue

Hey All,

I have been digging through threads and haven’t yet been able to fix my issue based on what I’ve found so far. Most threads I find on this issue are for manual tacos and my so happens to be an automatic. Long story short

2012 Tacoma 60k Miles Automatic Trans. No dash lights on at all. All brake lights work fine and turn signals. Horn is working. When I press the cruise control button inward to on Green cruise light turns on on dash ( cruise control switch located on steering wheel ) but when I try to set it nothing happens. I’ve tried at multiple different speeds but not yet had any luck.

Any suggestions?

 

I read through this post and it was helpful. After two years of no cruise control, turns out I just needed to check the sensors on my brake and clutch pedals. Works great now. Good luck.

https://www.tacomaworld.com/threads/cruise-control-suddenly-stopped-working.68224/

p.s. I've never posted another thread/conversation before so hopefully this works.