Bed tie down points?

Can anyone recommend a replacement bolt for the bed attachment bolts that include tie down points such as a D-ring? Something that would rotate to flush with the bed when desired.

I have no great way other than a cargo net to secure smaller objects in the bed. Was driving around with some marine batteries recently and had to drive like an old lady so they wouldn't smash around inside the bed.

I've seen a mod on here that was nice, but want to just purchase some parts outright if able.

 

Dodge D rings for big stuff and airline track for small stuff.

https://www.tacomaworld.com/threads/installed-d-rings-in-the-bed-pics.28533/page-16#post-4383957

In this pic I haven't installed my D rings yet.

 

Awesome thread, but since the bolts that hold my bed in place are all rusted out anyway, and I plan on replacing them, I was hoping there was a replacement part out there that came with a D-ring that requires no additional modification. I know that's lazy, but I acknowledge and accept that.

 

maybe this will help, found it under the cheap freemods section on here
https://www.tacomaworld.com/threads/cheap-free-mods.4838/#post-45406

 

I think that was the original mod post I saw...trying to find a part I can buy straight up, and replace my existing bolts with...no work required except remove/replace...

 

Just buy new bolts ,washer and tie downs . Dont know thread size or length though .You got a bed mat ? Stops things from sliding around .Maybe a bed divider too?

 

https://www.tacomaworld.com/threads/bed-bolts.149838/ post 4

 

Took a look at that, thanks. Exactly what I need. Just wish I had a part number for those clips though.

 

post 306 dodge d rings that people like
https://www.tacomaworld.com/threads/installed-d-rings-in-the-bed-pics.28533/page-16#post-4383957
Search d rings and you will find other part #s

 

+1 to dodge sprinter d rings, have them on my front bed bolts and middle bed bolts (short bed). think i spent 15-20 bucks for some BEEF d rings, and they go on real easy and i use em ALL the time.

 

Thanks for the pointers to the D-rings -- I read the linked post, and can't figure out what's meant by grinding down the retaining ridges...did you all have to do that when you made the mod?

 

Its only so you can take the washer off the bolt . When you remove bolt you will see what they talking about .You can alco use socket to pound off as seen in other threads .

 

I guess I'll just have to go ahead and order the new ones and see. My current ones are pretty badly rusted and I wanted to replace them anyway. Thanks!