What Have You Done To Your 2nd Gen Tacoma Today?

@Sociopenguin relocated his on his 3rd gen to behind the taillight so I may consider that if I feel the filler area is too much of a challenge.

 

I wish I had thought of that before I cut up my arm. The hose hasn't fall off so that is where it will remain for the time being.

 

I was planning on going to the 29th Fluid Film Meet but work came up. If there is something going on this weekend I'd like to hop on that if possible.

 

I am corrected it is the 29TH
Thanks for the head up . Now I can ride my Motorcycle.
TOMB

 

I don't trust the dealers for much. I prefer to do it myself because I know it is done right.

 

Got organized-ish



The 20% off of 2+ items was a nice surprise

 

I have the wheelers 3leaf aal with overload in. Sits little higher in the back with a 2 1/2” lift on the front but when I loaded up for camping with the trailer it sat a little lower in the back so I put firestone ride rites on and now I can air it up level or more if I want. Keep them at about 5psi when I’m not towing and they are great.

 

Where are located the t.case and front diff. breathers ?

 

285 70 r17 and the wheels are 17x9.5 I believe with a -18mm offset. I didn't lift the rear and only have a 2in leveling up front. That's what required all the trimming. Everything else is stock like control arms.

 

I would suggest behind the drivers side tail light, was easy to get to and I only drilled a small hole to zip tie.

 

Sharp looking rig.

 

Hollar at @CBoy808

 

I've got a Demello bumper on mine. I like it.

Get rid of the bend near where it bolts to the frame. Just have it come out straight. That bend it going to want to straighten out under load and will be an eventual failure point.

 

So I fueled up today and the actual mileage is 15.16 mpg. It's still not bad for pulling a trailer at 70 mph. I figured 25 was high.

 

Found my DCLB a leer topper. Got a great deal on it and only spent $150

 

Not specifically today, but in the past week:


Front bumper with off road lighting (Dually Floods and a SR20 Spot/Flood)


Rear bumper with swingout gate, and supplemental reverse lights (SR-Q Diffused)


Moved both shackles in the flip mounts backward for a little more shackle angle

 

Cup Holders?? We don't need no stinkin cup holders

finally got stuff permenantly mounted




got rid of all the Silver Grey on the dash

 

Agreed 100%!

 

Added a window sticker on the drivers side.