MY18 with jbl entune swap to kenwood wire help

Removing jbl entune head unit and installing a Kenwood dnx994s with maestro rr.

Using the idatalink TO2 T-Harness and have a few wires left and not sure of the connections, or if used at all.

1. LTGREEN - Ebrake (-)
2. PINK - Vehicle speed
3. YELLOW/BLACK - Foot brake

On the kenwood harness side I am just grounding the LTGREEN wire (parking brake) like on all my others for functionality of all video and gps anytime.

Help greatly appreciated.

Thanx,

Justin

 

Just call idatalink Tech Support and ask them any question you can think of. Had to call them last week and they were probably the "friendliest" i've dealt with so far.

 

contacted idatalink. as I suspected the following was assumed correct:

1. LTGREEN - Ebrake (-) = NOT USED (since I am grounding the kenwood harness wire)
2. PINK - Vehicle speed = NOT USED
3. YELLOW/BLACK - Foot brake = NOT USED