AZ Classifieds

Looking for a 7th injector kit.

Thought i would ask before i bought a new one.

 

Doing the same conversion so

 

Anyone have 3rd gen CBI bed bars for sale?

 

4 tires and rims? $$$?

 

Anybody willing to help out with a shackle hangar install / leaf swap in exchange for free beer and/or pizza or whatever sort of food floats your boat? I’m putting out some feelers, looks like getting it done at a shop is gonna be a decent chunk of labor, and I simply don’t have the space and tools/ help to do it all myself. I’ve yet to ask Sierra Expeditions or SDHQ but I’m thinking that they are all gonna want something like 350+ for the install.

 

I have one for sale. But its for a 1GR

 

I'll help at my place. Gotta start early though.

 

Yes 4 tires and rims

 

I can offer to help at my place as well, but I doubt you'll like my workmanship. I'm more of the GetErDone, if it works it works type of guy. I know that's like the complete opposite of you.

 

Better find someone with an air hammer like @RPS1030

 

I've got all the tools needed.
May need a specific size drill bit if the kit calls for one.
Will also need some smaller quality bits to use before using the bigger ones. Also need a coulpe cut off wheels.

I should have the rest covered, even an air hammer.

 

I suspect your assumption was influenced greatly by the "@Nitori Switchpro Wiring and Alternate Routing Methods and it's Effects on the Modern Society Dissertation"

 

This is just a feeler right now because I'm trying to decide if I actually want to do Icon Six Speed wheels for my runner. But is anyone interested in 4 Stealth Custom Series F5s matte dark bronze 17x8.5 4.30 backspacing wheels? Two are perfect, one has a minor scuff near the lugs from discounts idiots and one has some rock rash. I'm thinking $780 for all 4 obo. These are hard to get ahold of recently. Pictured is the one with the slight rock rash.

 

Do they come with hardware or am I going to have to source that on my own?

 

Anyone interested in factory ICON 650# springs? Only have about 4000 miles on them. Offers...?

 

You're funny. Lugs can go with them, I'll get more from SDHQ if need be.

 

You have to source your own though Jason

 

Bump

 

I'll do some maths when I get home as I planned on selling then together.

 

I would simply pose the question: can you drill a round hole, or am I going to have to hide the drill from you?

In this case it's mostly a question of if the holes are clean and the bolts are torqued.

Yes, my near-autistic tendencies with electrics is something I grapple with a lot. No one talks shit on the outcome though, just the process.

Don't get the wrong idea of me though. I've done my fair share of bush-mechanic shit- I've made makeshift gravity feed fuel systems out of Tropicana OJ jugs, foil-taped and zip-tied my way out of binds, and I have gotten vehicles home firing on "maybe just enough" cylinders. I'm not going to balk at a field expedient repair to get home, but when I am in a driveway I hold up a (mostly) higher standard.

And yes, I have taken air chisels, blowtorches, and drills to my vehicles before, it wouldn't be a new experience. To replace the diff bushings in my Miata I basically had to grenade the fuckers out of there with an air chisel and then blowtorch off the bonded rubber part...

When it comes to installing hangars on a frame there's not much extra to worry about other than cleaning up the frame a bit- and that's flapwheel and rattle can territory (and a break to let the paint cure a bit) because it doesn't have to be pretty, it just has to stop corrosion from happening in a spot you can't reach.

So anyways, it sounds like @Mike330R , @SamGoingHam , and I texted with @Man of Steel TRD who is also down to help and/or provide garage space , and I reckon the four of us could probably knock this job out in a weekend. So, I'll have to figure out a care package for my helpers... I'm thinking some homemade beef jerky, some beer, and maybe a gift card to someplace?

This weekend is too short notice but we could shoot for next weekend?