What Have You Done To Your 3rd Gen Today?

Color-matched my stock skid plate.

 

Rear diff breather kit installed. Maybe 30 mins total because I am OCD and slow but tucked it up near the gas tank neck.

 

"...and it's deep like 1 to 2 inches!" Cute.

 

I got cement to match the interior of my garage.

 

Are they scratches in the clear coat? I had a nasty scratch in my clear coat from someone who slammed their door into my fender (I only had 13 miles on the truck). I used Maguiar's Ultimate Compound "color and clarity restorer" first, followed by Meguiar's Scratch X 2.0 for what the compound didn't remove and then followed up with Meguiar's Ultimate Polish "pre-waxing glaze". Just be careful with the compound and scratch remover, really they are just extremely fine abrasives so you can overdo it. Good luck.

 

Well actually you can't, or should I say you'll be waiting quite awhile for a Gasshole. My use of the Honda Cap Holder came from that Thread as the Maker of the Gasshole is apparently very busy with other projects and runs out of Gasshole Stock as it is right now, and has been for a couple of weeks that I've been trying to order one myself! So, yes, there is a custom alternative for around $22.00, but they aren't readily available and until they are, I've got my cap holder in place!

 

Added some tufskinz inserts I didn’t peel and stick it in I just placed it in
Not to sure if I want something I can’t remove later in the future
Anyone had any problems with out sticking them

 

I think not adhering them to the console is a smart move. Much easier to clean should you need to.

 

Thats kind of what I was thinking

 

That's what she said...

 

Added these satin black “Tacoma” badges to my front doors today to enhance my ME-SO smoked mirror signals on silver sky paint...pardon my taco dirtiness.

 

I'm considering the OME 2" lift with 886 coils as well. Are you still seeing rake on the truck without added weight? I'm going to add weight to the front eventually, but I'm worried I'm going to be sitting too high until I get to buying the bumper.

 

@fortis44 look back a few pages I just installed the OME lift with 888 coils.

 

@taco_medic Thanks! So it looks like you're level then with the 888s, and I'll be a little lower than that with the 886s. Perfect!

 

New plates arrived today

 

Definitely still have rake, i also have a 200lb Decked system installed now. Didn’t really change much (rear end spring are +660lbs)

 

Did the MagLite install "mod"...I chose to BroRake it to make it easier to grab and stab.

 

Shit, haha, asked you the same question in two different threads. Thanks again! I'm sold!

 

Very nice.

...but for pro-level stabbing capability, you need a glass breaker tail cap:

https://www.amazon.com/Bust-Cap-Glass-Breaking-Caps/