FOX 2.5 Ext. Travel Coilovers + Uniball UCA

1) FOX 2.5 extended travel coilovers. with King Springs. They are 1' taller(14" vs 13") with the same spring rate(600#). I did this because I had more weight upfront and didn't want too stiff of a ride . Purchased/installed brand new, they have right under 10k Miles on them.

The good: Great condition, no leaks
The bad: One of the lower alignment bushings was not installed(don't ask friends for help) and apparently wore into shock mount. Buyer will need to get 1 lower spacer and it should be good to go for reinstall.

I also have the Fox spanner wrench that I will include(not pictured)

$680 SHIPPED










2) Uniball Upper control arms. I have no clue who makes these.... I think they are Builtright, but I could be wrong. I bought them new the same time as the coils. (So right under 10k Miles on them) Comes with bushings, UCA, hardware, you will need to supply your own UCA bolt.(or reuse the stock one). Overall good condition. Little surface rust inside the joint by the C-clip but not bad. I was able to get a full alignment on these running 35's.

SOLD SOLD SOLD

 

What’s replacing this?

 

I got a good deal on some stock coils with spacers

But really this

 

Dibs on the coilovers. pm sent

 

I can do $150 on the ucas

 

If I don't have any takers by the weekend I'll consider it

PM'd

 

aren't you in so cal too?

 

Nor-Cal

 

Pm'd on UCA'S

 

Dont want to derail the thread but what made you switch? I currently researching suspension and what I am looking at is ome BP51s and kings, I considered but I figured might as well go to kings. A few have installed bp51s on tacomaworld, was wondering why you changed from fox to king.

 

Only reason I switched was I found a killer deal on the kings used. They already had the heavier springs, and special valving. Plus I've always wanted resis(for dat street cred). from the limited time I have on them the Fox's are really close to the same ride quality. The kings do seem to soak up bumps a little better, but I also removed the sway bar this time so that might attribute.

 

Nice setup!

 

Also pm’d you for the upper control arms

 

Pm’d as well.

 

Nice setup, I have the same UCAs with Fox/res

 

Too true

glws

 

Did the deal fall through?

 

If I wasn’t across the US I would take them. Shipping is going to be killer. Glws