2018 LED Illumination Package install questions

So I have searched on here and only found the post about installing these on the 2016 models with the 2016 instructions. That post was like 2 years old, so figured I would start a new one.

I ordered this light kit and it came with new install instructions for the 2018 model (dated 4/6/2018 revision).

I am having trouble figuring out which wire connector on the driver side kick panel is the IC3 one?

Also, it says to wire into the dome light wires in the A-pillar? If I don't have a dome light (sunroof/moon roof in truck), will these 2 wires still act the same as if there was a dome light?

 

Got it figured out. Ended up going to the local Toyota dealer and talking with a mechanic about which one was what. Got home and connected it all up and they work great. No issues. Yeah!!!!!

 

Mind sharing a part or kit number for the illumination package?

 

Here is where I got it from, the PN is in it.

https://www.ebay.com/itm/NEW-GENUIN...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

 

Remember the part is from a SET dealer and the others; GFT and Toyota don't play well in the sandbox of life should that part require service or warranty work. Keep your receipt so that you can show proof on where you bought it. They can warranty the part but they make it very difficult to do so. A lot of those parts and accessories are not Toyota OEM parts. SET and GST have those parts crafted specifically for their distribution areas. They piss and moan, but can do the warranty work if you hold them accountable. Just talking from experience.