Baja Designs: General Discussion Thread

Any discounts for pickups?

 

The XL80 w/ Spot Lens Kit will be a great light for really lighting up the waters. If you aren't moving very fast and really want to light up an area, take a look at our XL80 Work/Scene!
https://www.bajadesigns.com/Products/XL80-Work-Scene-LED-Auxiliary-Light.asp

 

We don't offer any discounts for counter pickup. Our 10% Forum Discount applies to any order that is shipped or picked up in person. All you have to do is enter code: BDForums at checkout

-Bailey, Baja Designs
www.bajadesigns.com

 

A few BD equipped Toyotas from Overland Expo West. Couldn't get away much to take photos so I only took a couple. I'll have more to upload later in the week once the team is fully back in the office.

www.bajadesigns.com



(@mh.meier)




(@blackohio)


(@JerryTaco)

 

A nice mix of vehicles at Overland Expo West!

www.bajadesigns.com

 

It was amazing to see how many trucks were running BD lights! Good on you guys!!

 

Installed this 30 inch S8 on my 2017 Tacoma using the provided hardware, and exactly as instructed. I noticed right away what looked like some minor condensation inside the lenses. The lights worked fine and I figured it was not a big deal. I work out of the country 6 months a year, so my truck has under 2000 miles on it, it stays inside a garage and gets hand washed a lot. I avoid even taking it out when it’s going to rain. I know it’s crazy. Any way I have been home for about 2 weeks, washed the truck one time. When I turned on the light bar last night it was flickering. When I looked I found the bar to have about 1/4 inch of water inside, and the middle section was not even on. I have attached some pictures.

 

Sorry about the issue! Have you contacted us? The problem certainly shouldn't be happening and our Limited Lifetime Warranty covers manufactures defects. Please give us a call and we'll get this resolved.

800-422-5292

www.bajadesigns.com

 

Thanks, I had no doubt, it would be taken care of, your customer service is unrivaled. I tried calling this morning but wasn’t thinking about the time difference, I am over here on the East coast.

 

The time zones are always fun to try and remember

We are open Monday-Friday 8:30-5:30 Pacific Standard Time.

 

Love these lights. Just added my third set. Top ones Pro driving combo on Cali Raised low profile brackets, Pro spots inside on US Offroads hidden winch bumper, sport wide corning in the fogs.

 

@Baja Designs Just for clarification, sense I haven't seen it anywhere: Would it be possible to connect both, so that it would run both off of high beam activation and switch activation, or is it one or the other?

 

All of the Baja Designs

 

@JerryTaco

Pulled the trigger on the SDHQ Behind Grille Dual Bar Mount and a 30” Baja Designs S8 after seeing your killer rig.

 

Right on man. That's awesome, you're gonna be very happy. And thank you for the compliment, if you have any questions please let me know

 

Roger that, will do.

Thanks. Mike

 

With our wiring harnesses it's one of the other. It's certainly possible to run both, but would require some custom wiring on your end.

-Bailey, Baja Designs
www.bajadesigns.com

 

Rad shots!

 

When you want more options for mounting Baja Designs rock lights, you make them. I wanted something to mount some additional rock lights in front of my front tires but did not want to mount them to the plastic bumper cover... So we made some tabs that should make for a ton of mounting options and will avoid having to drill the frame. If its something anyone is interested, a buddy of mine here in Phoenix is gonna be making a bunch of these.

 

June is here! Who's heading somewhere this weekend?

-Bailey, Baja Designs
www.bajadesigns.com

*Tundra Plug and Play, Fog Pocket Kit & XL80 Pair shown