What Have You Done To Your 2nd Gen Tacoma Today?

Old have to doubly check mine but I’m pretty sure it’s A.

 

I think they test that stuff if you pay an extra 10$
They test how many additives are left in the oil to see if you can run it longer I think. I don't really care so I didn't spend the extra 10 lol

 

Rough country 6 inch and 20s and 35s

 

Got me a TacomaWorld sticker..

 

Finally broken in!!

 

​

 

Installed the sliders

 

Get to wrenchin'

 

Thursday after work!

 

Got the new delta joints in my icon uca, with new bushings and sleeves. Stupid cap does not go over the new ball joint so I drilled a hole, cut off the inner ring(badly), and stuck a plug in it. Now I can grease the joint but keeps the top nice and clean. Also put the rusty ARB bumper on her!

 

Measured once and cut 3 times.

 

I'm curious to know how you like the dynapros. Decent tire for 37lbs in standard load

 

Installed Black Oak LED ditch lights on top of Rago Fabrication 2nd gen ditch light mounts. No cutting or trimming required. Bracket install took 10 minutes. LEDs took about an hour 15 mostly to route wires. Will be aligning and adding lock tite this evening when sun goes down. So far pretty happy. I got the 40W Cree flood with removable amber covers. Mostly to keep the UV off of the actual pod lens but since they are removable I figured why not, just have two color options. Routed switches to fuse box tray. Eventually I’ll be getting a spod, but until then... I’ll have a wire nest tucked away in my engine bay.

Will probably upload some “How bright are they?” photos for you guys when it gets dark. I’ll do headlights, high beam, with yellow lens and without. Black Oak LED claims 6,240 lumens.

 

Installed a set of Nerf Bars Side Dropped Steps.



Next up. Amber Fog/Driving Lights.

 

Thought the stock wheels could use a little something.

 

Nice. Where did you get those?

 

Awesome day at the lake

 

I made them, the emblems pop right out.

 

You think that’s bad? I rounded off one of the top ones!! Then proceeded to snap the bottom hard line in half that runs to the left drum !