What Have You Done To Your 2nd Gen Tacoma Today?

Starting to flake and rust? I'm going through the same thing with my sliders

 

Flaking and really milky looking. Going with paint this time. Powdercoat quote was $400. Too rich for my blood.

 

I’ve had good luck with this paint:
http://www.vhtpaint.com/specialty/vht-epoxy-all-weather-paint

 

Thanks for the info. How much was it per can?

 

New wheels no more derp derp plastidip lol what do you guys think?

 

Raptor Lights finally installed. Been sitting on them a few weeks.

 

Sort of Tacoma related... installed a Nest cam out front to keep an eye on the Tacoma... and Camry.

 

Well ended up not getting uca on today because of the top long bolt that holds the uca...can't get it out because it's hitting the cab and fender lining so they're just gonna cut the bolt out get a new one from dealer and put it in the other way

 

You can bend that metal back with some vice grips if you access it from underneath the hood and the bolt will come right out. The metal is pretty thin and it's in a place you'll never see.

 

This right here \/

 

Awesome! I don't have any cameras inside the house... wife does not want to be on-camera all the time, too creepy for her. I'm heavily invested in Nest products already (Nest thermostat, Nest Hello, Nest Protects etc...) so it makes sense to stay in the eco system.

 

I feel for you. I kept telling myself "oh it's fine, it's just road salt from winter." Except it never came off. IveI got to get mine redone too except I really don't feel like pulling the sliders off again. Guess I'll be doing a lot of prep work

 

Link for lights? that you used.

 

RC 30” Dual Row Black Housing light bar
Cali Raised stealth mounts

Yee yee !!

 

Post up some night pics!! Really interested in doing this exact setup

 

I removed the original bedside decals that were worn and the clear protective film behind the cab that had black gunk around the edges. Then I gave her a very good wash, clay bar, and polish job.

And finally I put on some new bedside decals.

 

I used these from Super Bright LEDs.

https://www.superbrightleds.com/moreinfo/led-wired-bolts/miniature-led-license-plate-bolt/1685/3940/

 

Should have taken a before pic of the hitch, but there was a 90 degree bend in the plate, the plug cover was broken off... it was a disaster. I went to my landlord to borrow a chain saw and ended up hammering out the mounting bracket on an anvil to straighten it back out, replacing the plug, soldering a longer piece of wiring onto it, and then welded the new bracket onto the old one so it would fit back on the truck. The hardest part was realizing that only the blue wire and white wires transferred... the rest I had to figure out where they went. I caught some shit from @Pigpen because I didn't move the plug spot to the bumper... he says I'm just going to break it again... we'll see...

 

Changed the headlights to after market and added the 3rd gen OR wheels.

 

It appears my fog light mod went bad!!! It only worked on one light.
Yes they are aftermarket lights.
Hosed the engine bay the marker bulb needs a new rubber seal.