SOLD

I just made the switch to dmz in the rear and have my old tc kit. This normally retails for 1500 new, but I’m letting it go for half that...but you will need to call deaver in order to get one u-bolt for it and new bump stop mounts. This is about $30-40 for these parts which deaver keeps in stock individually for cases such as this. If someone ants to buy the kit and isn’t sure what to get I can help get that info. It’s been on my truck for about 20k and has seen about 8 wheeling trips or so. It’s a great mid travel kit and will works great with a quality mid travel coilover. I’m down to ship, but that could get pricy. I’m willing to drive up to a certain extent if someone local wants to try to work something out as well. Feel free to shoot me any questions on the kit.

 

@fatfurious2 what about this for mine?

@Coot83, how much lift did this give you? Those heavy skids make my truck a lowrider lol

 

I believe this is more for travel and not so much lift. @Coot83 these actually lowered your ground clearance right?

 

@Maggot61

 

They would lower ground clearance on the bottom of the axle where the leafs are. To be honest though if you drive over stuff with the tires then the leafs normally clear without issue. I forgot to mention that this is the hd pack so it should give you about 2.25-2.5 of lift. So if you want a three inch lift then these will give you less. You have seen it’s droop capability though dark goat when I went to your shop, granted mine also had the relocate which just adds more travel potential.

 

Haha yeah. I think im gonna pass, theyre not for me, but glws. Are you back in nova again?

 

Ah sounds good man...yea I got back in the area mid April. Now that the rear is done I’m itching to rest it out. Need to trim my u bolts on my new kit though.

 

I've got a sawzall...I'm trying to set something up at chaos. There's a dirt track with a jump there you'd like.

 

@eccracer104

 

Ever tow with these and if what? Wonder how they do

 

Any pics of your truck with this kit?

 

Well we need to roll there sometime man! If I don't have them diced off by then, I might need your help buzzing off the excess on the bolts.

 

I have done so basic towing at best. I used a trailer a few times which didn't go too bad since it has the heavy duty springs for it, honestly it does better with about 1-200 pounds in the bed. If anything my new setup is probably less prone for towing.

 

Here are some pics with the new glass...I will post again with the stock bedsides as well for reference.

 

This is with stock bedsides...

 

still available?

 

Yep still is.

 

Sending another PM. Forgot to respond last time.

 

PM Sent.