Colorado B.S. Thread

Post some pics from the trails. I need to live vicariously through you!

 

I'll have to dig through them ony phone to see if I got any good ones, but here's a couple of quick ones. Hoping the GoPro got some good vid today too.

@CO MTN Steve going through one of the crossings

Up at the Waldorf mine

 

He said y’all showed up one day and just never left

 

Oh and the pinstripes were a plenty, especially after a wrong turn that led to a missing piece of trail

 

Cheers!



Eating a good dinner and amped up to climb to the top of the ridge on the far right and go all the way across off the left side, over one more mountain and circle back.

#lovemybackyard

 

Note to self. Next time buy a vehicle with a transmission cooler.

 

Pretty much haha.

 

I'm about to do the exact same thing. Parts just got in today.

Which one did you get?

 

I thought the towing package came with a trans cooler for autos?

 

Just the cooler wasnt the hard part. I had to add the thermostat to the tranny. I went with this one

$58 Hayden 679 Universal 11” Rapid-Cool Add-On Transmission Cooler to Enhance Cooling (not for direct replacement of the factory unit)

https://www.amazon.com/gp/product/B000C3BBKS/ref=oh_aui_detailpage_o01_s02?ie=UTF8&psc=1

 

The tacoma does but its never a bad idea to upgrade it. The factory one is tiny.

 

Anybody know of trailer shops doing sales for hail damage?

 

It just made the day more fun and interesting

The wife loved it today too!

 

My plans for my hike today were cut short by no easy way up the cliff face.

Was planning on sumitting two 13ers and three 14ers. Might just have to alter my plans, do an overnight and add a few more mountains to the checklist.



Pinstripes.. Yeah earned some, along with some scrapeage from a steep drop into and out of a water crossing.



Doesn't look steep, but front bumper was buried in rocks at that point. I backed up and stacked some to prevent damage.

 

Finally got around to installing the used Prinsu rack I bought a few months ago. Stripped off the old paint job and sprayed it with bed liner.

 

I think I found what was causing my foxwing to creak while we were driving down the trail yesterday

 

I forgot to ask you yesterday what mounts those were that you used to mount the Foxwing to the Prinsu?

 

I'll have to look it up, but they are from rhino rack. I did have to modify the holes a bit to fit the width of the slots on the prinsu bars.