Where to buy T Slot Nuts for bedrails in Canada

Anyone have a good Canadian source for the T Slot nuts for attaching things to the Tacoma bedrails? I see them on eBay for $20-$25 for 5. Seems pricey.

 

That's pretty much what you'll pay up here.

I've seen them a little cheaper on Amazon at times but still pretty pricey.

Try doing it the reverse with a carriage bolt sort of like a T bolt. I did something with some weld nut and 5/16 bolt. Works think it depends what you're trying to mount.

 

I haven't checked on the Tacoma but I know T-track in power tools (router tables/table saws etc) that you can get away with toilet flange bolts from home depot etc

https://www.homedepot.ca/en/home/p.extra-long-toilet-floor-bolt-set----solid-brass.1000515018.html

You might be able to find something better at a home hardware etc but its a start

 

Fastenal carries them;
https://www.fastenal.com/products/details/302932-130481
https://www.fastenal.com/products/details/0349555
Set of 4 was just over $25.

 

sub'd

 

FYI, there is a button at the top right of the page where you can "watch" the thread. That way you don't need to hit reply and "sub'd" the page

 

Came here to say this.

 

they used to list ones made from stainless steel but one has to be careful not to over tighten else the SS can gaul and then it's very hard to separate bolt from nut

 

I got mine on Amazon. I would assume Canada can get it that way.

 

https://www.ebay.ca/ulk/itm/332629921417

 

Not sure what go fast camper charges for shipping but they have a really nice option for t slot nuts for about $12

 

acklands grainger , get them to order ( or if they have in stock ) spring nuts. Then just snap off the spring when you get em, and voila! Youve got a threaded nut that slides into the rails. Its not a perfect fit, but it works just fine.

 

Walmart.ca shows a set of 5pcs for $10…
Made in China…but better than the $50-60 I see posted on Amazon for the same thing

 

I did what Joe suggested and modified some carriage bolts. Very easy to do and they will hold way more weight than the rail can support.