What Have You Done To Your 3rd Gen Today?

Definitely... Who cares, do what YOU like.

Private-Airman Androsky supports you.

 

Matte black decals from Import Equipment

 

High quality just like all their stuff. No wait, this one happened to be in stock(they post online when stuff is available). Fitment is good, it’s a tab long.. probably meant for full size trucks with larger visors. Overall happy with them

 

How many threads do you have showing on your coilovers? I believe they come set for the 6” at the top and it looks like you have them down about two inches for additional 2” inches of lift. I believe fox states 8 threads is about an inch of Lift. Also, did you adjust the passenger compared to the driver’s for the lean or no?

 

Thank You for your service.

 

Attempted to repaint my truck last night...

 

I think you need to adjust your sprayer. Should be coming out a bit finer.

 

YOU trying spraying mud and see how fine a spray YOU get!

...but seriously, what happened there? One of those pesky mud rains?

 

Is the gloss black color of the pro center caps pretty close the black on the OR wheels? Seems like it may be a bit more glossy. Haven't had a chance compare in person. Nice option to change up the look!

 

Mine looks the same way!

 

Crappy weather in AZ. Dust storm and a bit of rain (30 seconds) repaints any vehicle...

 

***
Our dust is SOOOO fine is hard to remove from all cracks and crevices.

 

I like the car pro coating. Its very easy to use. Just make sure to do it at daytime and buff off almost immediately. A little bit goes a long way.

 

And G-Town seems to get hit more often than other parts of the valley, especially right around Finley Farms...

 

You need load resistors to stop the LED hyper flashing.

 

26 threads. It’s even on both sides. The shop didn’t mess with it. Kept it the way it came from bds.

 

5100 Bilstein
887 OME
285/70/17 BFG KO2 17x9 Assault +0 1.25" spacers (rubbing )
I don't know if the rubbing is for the spacers or what do i need to do!

 

First, thanks for the post.

Ok, so there is a gasket along the edge of the firewall???????
Where? Along the left side (looking forward) where it meets the drivers side body?
I certainly didn't see anything like that while looking inside the engine bay.

Thank you again.

 

A belated return to TW... A few photos from the Canada Day long weekend (happy Independence Day to the cousins to the south).
Temperatures maxed out at 109F, now I understand why many of you in the desert regions are running fridge/freezers in the trucks!

Dog kennel worked fantastically. Now to clean it up, sand and start doing the body filler outer body.

 

Added 2x Bike fork mounts to top of my OEM Tonneau cover. Love it!