Will 285s fit my truck?

Looking to buy a new set of tires for my 2nd gen TRD Sport. After some reading and research, been eyeing p-rated Nitto Ridge Grapplers or Falken Wildpeak AT3Ws. Leaning towards the Falkens, actually. Currently running a set of p265 70r17 Toyo Open Country AT IIs, which have been awesome, but now need replaced and wanna try something new. Anyway, my question is whether I can fit 285s on my truck. Lift specs, etc. are listed below:

Approx. 2.25" lift, give or take
Billy 5100s (set at 0)
OME 2884 coils
Spidertrax 1.25" spacers
Stock rims (2013 17" TRD sport rims)
No cab mount chop
Stock UCAs
Front flaps and tabs removed

Can I fit 285s on, given the above specs, without rubbing or needing a CBC? Thanks!

 

Yes they will fit with minor trimming of the plastic and if you off road you will need to hammer the pinch weld and do the cab mount chop.

 

I have 17x9 +0 w/ BFG KO2 285/70/17... 5100's set 0 w/ 2887 OME and spacers 1.25" but you will have rub big time!.. last night I took them away and problem solved... no rub at all... no to much difference...
This picture is with spacers...


This picture without spacers

 

sorry i didn't see it was 2nd gen.

 

Do you have any pictures of where the wheels sit in relation to the fender flares with the spacers? like how much they stick out?

 

The 285 ridge grapplers only come in E right now... that might help your decision. Can’t go wrong with wildpeaks. Although I’m hoping that by the time I need a new set they’ll make the nittos in C or D range.

 

Hope this will help..

 

Yes thank you, It doesn't look like it sticks out past the flares too much. If you remember, how far would you guess? maybe .25"?

 

I think it was like 2'' out of the flare..

 

2"?? that doesn't look like 2", unless I'm greatly overestimating what 2" past the fender looks like.

 

i'm wanting 285's so bad ....have 888 coils and LR uca's and cab mount chop .........can't justify taking the 265 ko2's off quite yet....I say go for it man !

 

I didn't take pictures to see it, but for me it looks like 2''... I will try to put them back on... I let you know..

 

This picture is without spacers..

 

Cool man, thanks for the pics!