Cap City Build & BS AF

Where did you guys mount your brake controllers at? I was considering in the front pocket of the center console. Originally was thinking the pocket to the right of the steering wheel but it seems like it would stick out too far.

@lynyrd3 @BadDNA @MarX

 

Center ,under hvac controls . In the empty cubby hole .

 

It should be as level as possible but this is completely acceptable:

 

This ^ shown Here v

 

Yup

 

I think the P3 is one of the few that doesn't have to be level, just inline with the vehicle. Mine is located below the coin drawer on the left side of the wheel.

 

My clumsy ass would have that broken in a week

 

She needs a cheeseburger or 10

 

Minimum 2 dbl qpc's with chee a day for a year or 2

 

Yea, I agree, I think the Prodigy (newer model) changed the whole level front to back aspect. Mine was certainly not level. I kinda meant level side to side. Actually, to be level level it would have to be on the dash, and in some older trucks you will see that.

 

She needs something but it ain't no cheeseburger.

 

Looks like the price has dropped significantly since I bought mine and now they come with the wiring harness too. Jeeze.

 

You mean if installed in the center console will need to be cut and wires soldered in. Think I'll just solder the wires between the pigtail that came with the truck and the pigtail off the controller. Save that $15.

 

I knew I liked you

 

Another one I like ...

Ok, ok .... a big mac then .. that's MAC not Murph

 

​

 

I read that as Murph in her Mac.

 

I'm pretty sure this is completely plug n play. You might have to make a hole in the back of the cubby for the wiring harness but that is it.

 

Good morning