Wheel Specs, do they fit?

Tried to search multiple threads but the answers either were partial or what I wasn't looking for.

Will these specs below fit a stock TRD OR?

Size: 17x9
Offset: -12
Backspacing: 4.5
Hub: 108mm

Tire size: 265/70/17

IF they don't fit on stock height. I plan on raising 2 inches in the near future.

Would these specs be poking out too much? Does anyone have pics of these specs SPECIFICALLY?

TIA!

 

"Compared to your existing wheel, this new wheel will have an inner rim which is 11.6mm further away from the suspension strut. The outer rim will poke out 62.4mm more than before."

wheel specs are a different language to me.

 

They'll fit flush with the fender. No modifications needed to run them.

 

No shot they sit flush with the fender and OP they might rub while at full turn in the front of the fender wells with that much offset.

I've got 17x8s with 0 offset with 265/70/17s and it sticks out of the fenders about an inch, where as stocks were about a half inch inside.