What Have You Done To Your 2nd Gen Tacoma Today?

I'm never changing mine. It's the one fluid I will not touch.

 

This is a train horn system Im installing in stages. I have been posting pic as I go along.

 

Where did you find the Taco Sauce decal?

 

TC spring under kit

 

California requieres a front plate. We keep the on off my wife's mini in pocket behind seat. You have get smog checked every 5 years but no windshield sticker Registration sticker goes on rear plate. and card goes in vehicle. If you don't have your front plate and get stopped for something else you will get written up as part of the ticket. Have mount it and have it signed off.

 

Had 255/85R16 Cooper ST-MAXX installed by Discount Tire with all their crazy warranty/service shenanigans included. Free rotation and balance every 6k miles. B-)

 

Wow, they have this size back in stock?! I checked a few weeks ago and my local DT couldn't find any in stock across the country.

 

New wipers.. couldn't stand the streaks anymore.

 

What'd you use to press the ball joints out/in? Hook a brother up with a part number for the BJ's too please

Both of the BJ's my LCAs are starting to spew grease. They're fine for now, but I'm wanting to replace them sooner than later so I'm not paranoid about them failing when I wheel. I know it's easier to just buy new LCAs from Moog/Dorman. However, I'd rather keep the OEM arms and spend the money on Whiteline bushings and new ball joints.

 

What’s the bracket you got for this?

 

Ball joint acdelco ,moog bushings,here’s a pic of what I used.I rented ball joint press & a master press kit from auto zone, to press out the ball joint you need a 2 3/8” or 2 7/16”tube,to press in 2 1/4” tube.Just rent the to kits so it makes it easier .Hope that helps you when you take this on.

 

Fj vs 4runner, figured id ask here since both forums seem biased

 

I personally like the fj. But it suchs trying to see traffic lights.

 

I got this from @allinquicksand that’s his Instagram. He makes custom tacoma decals. That’s where I got the one on my driver and passenger side doors too.

 

And my girlfriend today told me to seek professional help. So here we go. She claims I go out of my way every time I drive to find mud, dirt, or anything dirty to drive through. Today I got the truck stuck. What kind of tires would you recommend for some one who tries to stay off the beaten path. Here is my current tires.

 

I want one sooo bad!

 

I hope this is a sufficient picture! I’m going to go to the .85 setting and it should be close to level.

 

Tried to take a pic of what I did and upload it, but site kept bombing out on me so... No pic.

But what I did was remove the cap...

 

Couldn’t wait for the fuse block and circuit breaker! I’ll figure it out later . installed, voíla!! Took me a total of 1 1/2 hours, not bad. I did have to trim the outlet for the switch to fit

 

Got these too! Ready for anything....