The Lair

@EatSleepTacos where did you get the aluminum for the swing out table?

 

Hell yeah John

Bought it off of @Darkgoatracer. He bought a full sheet for a roof rack project..

 

Where'd you get the seat lift?

 

Just buy some uhmwpe round stock and drill a hole big enough for a 10mm bolt go get 2 10x1.25 50mm min and Bam done. Goes in the rear 2 holes. Most lift their seats 1" I have mine lifted 1 1/8"

 

I still have like a 3rd of a sheet left.

 

Boom, sell it to @ADV4R and I'll bring it with me to AOAA in a few weeks

 

Well what does @ADV4R need? And when is AOAA?

 

August 25th or 26th and he's making a swingout table like me. Unsure his dimensions.

 

Perfect connection! Thanks @EatSleepTacos! I will get dimensions tomorrow, I'm sure it will be similar to the size Randy used though.

 

Mine was pretty freaking big. I should have made it smaller. Also I have 3 extra of the latches that I used. I can give you some if you could use them.

$13 Accessbuy Toggle Clamp Latch 4001 Style,150Kg 330Lbs Holding Capacity Toggle Latch Clamp,Adjustable Pull Action Latches Hardware for Smoker lid,ToolBox Case Trunk and More (4.13")

https://www.amazon.com/gp/product/B01NCATK7W/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

 

Pretty good place to source metal
Here is their locations scroll through to see if one is near you for future projects. Also googling metal suppliers or welding suppliers in your area usually turns up some good results. Metal supermarket is good because you don't have to get huge quantities. They are kinda like fastenal where they cater to supplying shops and such but also cater to the low volume or home jobber crowd.
https://www.metalsupermarkets.com/location/

 

Yeah I will defiantly have to get out there with a tape measure first, but just to give a ballpark size. The table idea was kinda put off with the selling of two of my bikes and purchasing of the ADV bike and then the fridge....and getting the sway bar end-links extended and installed, but the table definitely needs to come next.
Perfect yeah, they seemed to hold pretty good for you, I could make them work

 

So THAT is what ADV means in your name! Adventure! (right?) That makes sense. And I'll try and remember to bring the latches. I just need to put them in the truck as soon as I get home from work.

 

Blue........ whale...........Moby fits better, you can thank me later.


Maaco does give shitty paint jobs btw....

 

I binged season 8 last night.....lol

 

Thanks for the link! They didn't show anything on their map super close to me, but seem like a solid resource. I have a supply of scrap steel that I attempt to make anything I need from, but aluminum is a little harder for me to source.

That is correct! Adventure 4Runner...Adventure motorcycle, anything that will take me super cool places!
Thanks man, they should be a big help.

 

There is one in Edison, NJ don't know that area. I have family up in West Orange, Morristown, and Princeton area.

 

9just watched the walk around from tacomaholic. Love the truck. For the dog bench ever think if a mole panel? Been living mine.
Don't remember who i purchased it from but he makes them and sells them on tw.

 

@ovrlndkull Is this the winch Brad had or has rather??


https://www.ebay.com/itm/X-BULL-130...057.m570.l1312.R1.TR11.TRC2.A0.H0.Xwinch.TRS1

 

Yeah that's it! Trying to get one before sun???