A little help figuring out lift height

I recently purchased the bilstein baja kit seen here:

https://m.ebay.com/itm/COIL-OVER-4-...IGGYBACK-KIT/283004055003?itemId=283004055003

I have a 2007 4x4 with the stock suspension and a 3” lift spacer up front and 2” blocks in the back. I want to keep the same amount of lift with the new struts but am having trouble finding exactly how much extra lift the new struts come with. I need to know what size spacer I will need with the new struts to achieve the same lift. There doesnt seem to be much info about them online and my searches here are not turning up anything.

Thanks for the help

 

You’ll get ~2” on the front with that kit and nothing in the rear.

 

Agreed. You’ll see 1 to 1-5” And the 3” spacer will have to go. Too much lift for the CV joint. So, I recommend the 1” coil seat spacer from toytec. It’ll keep you at 2 to 2.5” up front and will be a major ride improvement. http://toyteclifts.3dcartstores.com...JA-and-Pro-Edition-Tacoma-4Runner_p_1065.html

 

Thats exactly what I needed to know. I will place an order for the toytec spacer and leave the 2” blocks in the back. Should I leave the front shocks set at different levels like they came?

Thanks!

 

I would. Put the higher one on your drivers side.