Show Off Your Brute Force-Fabbed Gear!!

Does anyone know what size screw works for this? I'm trying to mount my license plate to my high clearance bumper but I can't get the stock screw to fit in the hole I'm pointing at.

 

When you say it doesn't fit, what do you mean? Too small, too big, not the right pitch? It could just need to be re-tapped because of the paint

 

I think it's the paint that's making it not fit.gonna give it a other go this weekend.

 

Does anyone have a pic running fox resi mounts with the brute force bumper? The extra support brace looks like it will interfere with the fox resi mount that bolts into the sway bay location.

 

I can take a pic later when I head outside but yes, I have my resi mounts for my ADS shocks sandwiched between the frame and that front bumper support piece. I did have to move the resi mount from where I had it originally by an inch or two.

 

Can anyone tell me where these parts go on a high clearance dual swing out?

 

The 3rd and 4th half moons go by where down where the hinges are. It lets the stopper slide and then go into the bigger hole, keeping the swing outs open. Two little holes are just to screw in.

Not sure on other parts, mine was custom sized. Maybe some fender supports?

 

Check out this post and the one below it for everything but the part on the far left, I'm not sure what that is.

Show Off Your Brute Force-Fabbed Gear!!

 

everyone that posted is correct. Im unsure about what the piece on the far left is though

 

Thanks for the help those picture explains everything. The piece on the left I think for the single jerry can holder lock or maybe my camera mount? Any pictures for the camera mount? I ordered one but I think Bill forgot to included it in my shipment, waiting on response.

 

The mounts i got from @M C M has a hole in the middle so the bolt for the support bracket can go right through. Not sure what the fox mounts look like but hopefully you can drill a hole or something to get the bolt through. If anything, it’s probably more secure if the mount is sandwiched between the frame and the resi mount anyways

 

Anybody know how I can find the beefed up bumper/frame brace? I saw someone had installed them with a Pelfreybilt but I couldn't find them on the website.

 

Quick test fit before I paint tomorrow

 

Anyone know how to assemble the bearings/seals for the swing out? First time doing this thanks!!

 

any chance you guys will make front bumpers for first gens?

 

They make front bumpers, just call up Billy and ask. Here's his hybrid version



He also makes plate but I can't remember who has it

 

Looks like we're supposed to re-use the bolts for the OEM bumper, but mine are rusted to hell so I think I'm going to need to replace them after attempting removal.

Anyone successfully source them from Home Depot? HD seems to be the only place open this weekend where I may be able to get my hands on them.

EDIT: I'm actually missing a bolt so for sure need to make a run

 

Home Depot doesn't have a large of a selection of Metric fasteners. If you have an ACE hardware, they should have every thing you need.