Running Board - Part number assistance

Looking for a part number to match 3rd gen taco TRD Pro. I am looking for the genuine Toyota Tacoma part for this exact board but 3rd gen.

Thanks,

$506 Toyota Genuine Accessories PT212-35055 Running Board

https://www.amazon.com/gp/product/B00DPIEPIM/ref=ox_sc_act_title_1?smid=A3H4LX9YDQDT6X&psc=1

 

There isn't one. This board was made for the 2nd gen but will fit our 3rd gen. If you like it buy it.

 

They will fit the 3rd gen even if the part# is for the 2nd gen. I have a 2018 TRD and bought the ones you are referring but ended up selling them for a different ones.

 

Access cab.
https://parts.olathetoyota.com/oem-parts/toyota-running-boards-pt21235053

Double cab

https://parts.olathetoyota.com/oem-parts/toyota-running-boards-pt21235055

2nd and 3rd gen have same bolt on pattern. Amazon says they won’t fit but they will.

 

What? They were made for 3rd Gen's, although not specific to TRD Pro. They were aluminum instead of plastic. I usually see them on Limited's.

https://toyotaparts.mcgeorgetoyota.com/oem-parts/toyota-assist-steps-cast-aluminum-pt76735160

 

Thank you! I had a feeling the bolt pattern was the same but wanted to check with the experts here first.

 

So anyone 2nd gen nerfs will fit on the 3rd??

 

Yes. Bolt pattern for running boards/nerfs are the same.

 

But make sure the cab/bed config match up. i.e. Only 2nd Gen DCSB will fit 3rd Gen DCSB

 

Don't forget that LB are different than SB (obvs longer).

 

Sorry to revive the dead.....

Does the bed size matter on running boards or just the cab?

I was looking at the

$506 Toyota Genuine Accessories PT212-35055 Running Board

PT212-35055 for 3rd gen DCLB

 

Just an update incase anyone else finds this thread ...works fine on long bed.

 

DCSB will fit DCLB, it just turns at the end of cab. DCLB won’t fit DCSB, as it has the longer tail to fill the extra space before the wheel. It will instead interfere due to the bed/wheel difference. AC is different altogether is my understanding.

 

I bolted those exact running boards on my 3rd Gen after taking them off my 2nd Gen. DCLB

 

Those are the SB, I can see by the hardware locations. I have the SB on my LB.

 

I was able to get them installed fine. Threw me for a loop as i didn't realize the mounting posts adjusted L/R as they were not initially matching up with holes. After i figured out and adjusted they matched fine. My previous ones didnt adjust so was a little different. These look so much better even though its the abs or whatever plastic. I dont need sliders.