1st Gen Lunchtable Thread - General Discussion

Make sure to use grease that won’t eat the bushings.

I don’t know about either of the ones you’re talking about

 

i'm not going to do a snapchat vid i regret putting a selfie lol

 

No moly on poly! Use Super Lube or basic lithium grease

 

Wat

 

Reread

 

tyler your high go to bed lol

 

Ah. I see. Any recommendations?

I pumped all my U-Joints full of red-n-tacky, hope that's okay.

 

Yeah that's fine, metal on metal is fine for moly but with poly you need super lube or red and tacky or some other basic lithium non fortified with moly

 

Cause of what I said? Ya?

 

Oh, so the Red-n-Tacky stuff I have is A-Okay to use with the bushings and the shackles?

 

Yeah

 

Great. I'll try and get that lift on tomorrow.

When would you use grease with Moly in it?

 

Huh.

 

@BartMaster1234 so guess that mean you not coming jn for dinner to see the volleyball chicks lol

 

Wheelchair

 

For wheel chairs

 

Slip yokes are the only thing that expressly calls for it. You aren't really supposed to use it on ujoints because it causes the rollers in the needle bearings to be too slippery and get wear across the top. But most metal on metal contact things are fine like you can use it on the bolt the goes through the metal sleeve on the daystar bushings because that part is metal on metal. But you can't use it to put the metal sleeve in the poly bushings, ya dig?

 

I wish. I can't even drink water without something hurting.

 

Gawd you’re a pussy

 

Rip