Show off your aux fuse panels.

I did not.

 

I know how things tend to vibrate and shift position over time in vehicles. Definitely don't want to introduce a problem if I can prevent it from the start!

 

Has anyone who has the cooper bussmann rtmr ran out of relay / fuse space for their tacoma? If so let me know as I'm unsure if I should start with a larger box.

 

Solder, crimp, or both on terminal connections?

 

I do both but there are arguments against that.

 

Just installed mine using 4awg wire

 

Is that a pelfreybilt mount?

 

Yup

 

@AWD_Jeff what type of terminal did you use on the fuse box? Crush or solder?

 

Looks good, I think that'll be the one I get.

 

I was lazy and purchased online. I believe it’s crushed.

4 Gauge AWG Custom Battery Cables - Solar, Marine, Power Inverter - Copper Wire https://www.ebay.com/ulk/itm/381118203401

 

Sorry my bad. The smaller 12g ish wire

 

I did both, crimped everything with a vice then soldered it up well.

Also finally got mine installed, 1 Master relay on top runs 4 relays bolted underneath to all be switched when the truck turns on. They all terminate at the 4 pin terminal on the back right for fast access for future switched items. then I have my aftermarket fog lights relay bolted to the top so I didn't have to mess with adding that to another relay. Fog light relay and my dashcam hardwire really messed up the "pretty" aspect of it once I installed them. Thinking about putting the fog light relay on the bottom and re routing the dashcam hardwire.

 

Ic. I’m running caliraised ditch lights which is probably a 14g. Also, national luna battery monitory which came with a 16g wire.

 

Anyone install a Pelfreybilt aux fuse pannel mount recently? On a 3rd gen , TRD OR, manual.

Anyone resolve this interference?

 

found a spot inside cab for the interior relays and fuses. back of center console under the cup holders. plenty room. dunno if same space available in 2nd gen.

 

Yup. Same experience. This pannel is junk to me. Money wasted.

 

Fortunately mine fit perfect.

But 2nd gen.

 

going to try passenger side. rtmr attached to battery tray.