1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Transfer case vibration in 1983 Hilux

Discussion in 'Hilux' started by nsmc4, Sep 2, 2018.

  1. Sep 2, 2018 at 8:51 PM
    #1
    nsmc4

    #1
    nsmc4 [OP] Active Member

    Joined:
    Jul 9, 2018
    Member:
    #258789
    Messages:
    34
    Gender:
    Male
    What would cause this knocking/vibration in transfer case? 1983 4WD Hilux/Pickup with manual transmission.

    https://youtu.be/LWZ2yU3aYiQ

    Video starts with truck idling out of gear. I get in, depress clutch and put in 1st then slowly release clutch (no throttle) and the transfer case starts knocking. I don’t fully release the clutch. Depress clutch and put in reverse and slowly begin to release clutch and transfer case starts knocking again. Do same in 1st again then in reverse again.

    Transfer case fluid looks good and clean and is filled to the fill hole.
     
    nsmc4, Sep 2, 2018
    #1
  2. Sep 7, 2018 at 1:02 AM
    #2
    the_white_shadow

    #2
    the_white_shadow Well-Known Member

    Joined:
    Jul 30, 2018
    Member:
    #261052
    Messages:
    933
    Gender:
    Male
    Are you sure the case is not in between gears? Ie 2wd hi and 4hi?
     
    the_white_shadow, Sep 7, 2018
    #2
To Top