What Have You Done To Your 2nd Gen Tacoma Today?

Bedliner, nuff said. They all end up looking like doodoo after a couple runs through the funs!

 

Not too bad... just take your time so you don’t break anything. Many good videos on YouTube.

 

Still need to cut the sides a little higher? Is there an issue?

 

Okay thanks !

 

Try aeroskin by AVS. Same thing, maybe they sourced it to Toyota at some point in the past.

 

LOL EVERYTHING HAVES TO BE WRITING ON CAPS AT MY JOB "TOYOTA" SORRY IF YOU GUYS OFFENDED

 

Not offended in the slightest, you just sound like an old person trying to use a darn fangled computer

 

If you install them yourself be sure to tape your fender to avoid scratching. You can see how I did it on the driver's side with painters tape.

 

DUDE!! WOW!! Go big or go home!! nice rig.

 

I need to high clearance my high clearance bumper. Lol. No real issue, just not a fan of the boxy look. I trimmed up the sides a bit and am going to incorporate a bottom plate here soon that will sit at about a 30 degree angle.

 

I had Monstaliner on my FZJ80. I beat the piss out of it for 4+ years and it still looked new when I sold it. Didn’t fade or scratch. Good shit.

 

just did the anytime rear camera mod this weekend... Modified the oem style pushbutton switch to white LEDs and both are lit when dash lights on. I modded the switch to send a ground signal out to the ground side of the relay. This really simplified the wiring... 1 wire to add a fuse, cut the signal wire and wired each side to the relay then had the wire from the switch. Pleased with how it turned out, although the relay click is audible, which might be due to tucking up near the dimmer switch. 2012 O/R and the connector was as described in previous posts. For those interested, I am attaching a photo of the modded switch. Cutthrough the 12v (+) trace to the 2nd (on) LED and ran a jumper wire. The switch LEDs are now fully on the illumination circuit and dim properly. The other two pins have a ground in and out which activates the relay.

I also relocated the RSCA, vsc and A-trac switches to an overhead switch panel (cutting, soldering and running new wire bundles up the a pillar). Busy weekend!

 

I mean, I don't think anyone is offended, but its not that hard to hit the caps lock key when you start typing anywhere other than whatever you do at work that needs to be in all caps.

 

they removed the caps lock key from his keyboard.

 

Random TACO photo!

 

She says the same shit to me "be nicer..." (me) "I do what I want, dis is Imerica!"

 

so true I have 4X4 TACO and some dude at the gym asked if I owned a Mexican restaurant or something...

 

I like those DRLs. Where did you get them and how did you wire it?

 

Every time... *confused look* Do you own a taco truck as well?

The food cart down the street has a 1st gen tacoma to pull the trailer. A for real for real taco truck! Gonna have to snap a pic next time I go there.

 

selling my pair of Avid Off Road bumpers w/ 4 light mounts I need to upgrade to full bumper replacements! $475.00 for the set!
also have some N-Fab step rails for $180