Part# or anyone have these?

removed my brand new step tubes and want to fill the holes in the body. Here’s a photo from a brand new truck on the lot. I’ve stumped the parts manager and the regional rep from Toyota. They can’t find these in the parts schematics. Anyone?

 

To clarify... these fill the stock holes in the body that are there to mount the step tubes. 12 of them needed.

 

Doesn't help you, but I used bolts in mine. Believe they were m8

 

Just ask the dealer to keep some aside after they install a set. We throw out probably 50 of those daily.

 

The parts guy had non intention of helping out like that. I actually asked. He said exactly that. They just throw them out.

 

i still have all 12 that i removed when i installed my nerf bars. this is what they look like. they're about 3/4 in total length. you can probably find something similar at any auto parts store.

 

You would also think I could buy them from my local dealer but apparently not.

 

True, but they’d probably charge you $4 for each one.

 

This is from the second gen, but should be the same plug.
https://www.tacomaworld.com/threads...bolt-to-seal-side-step-mounting-holes.409163/

 

The quantity is different, but it looks like 90467-A0014.

 

You're better off filling it with rtv if you want them covered.

 

Just search Amazon for plug retainer

 

I saved mine when I installed my steps. But I only have 10. Maybe because I have a short bed?

I know you said you need 12. But if you’re interested, I’ll sell them cheap just to help you out. I’m thinking $5 over shipping just to cover driving to the post office. PM me if you’re interested.