Inesshell bs and lazy af build

smoked inner ring

 

What are the 3 little LEDs facing down for?

 

work light

 

Rear Bamf Relocate and king smoothies installation

tools needed:

lots of patience, lots of cutting wheels, and even more grinding disks

would i recommend.....no

before:


cut and grind all the annoying welds down



use an angle finder and set the tower at 10 degrees and bolt shock until it sits with bracket on axle where shock body is in line with towers




unbolt and finish welds, did 2-3 passes where i could

 

Rigid Chase light install

tools:
wiretaps
16ga wire

where to tap on tail light plug:
red- reverse
blue- brake
green- running light
strobe - wire to separate switch
work light - wire to separate switch




with brakes on


running lights


strobe

https://www.youtube.com/watch?v=qH66ddEcooA&feature=youtu.be
*work light and reverse light not shown

 

I want a picture of the strobe in action

 

i only recorded one of the six strobe modes

https://www.youtube.com/watch?v=qH66ddEcooA&feature=youtu.be

 

I was being a smart ass because a picture of strobe is impossible that’s super cool though! I like that you added a third brake light since your factory one is blocked.

 

fox guards on the kings

 

Damn fog

 

haha fixed

 

Gotta do some shaving to fit but they work. They should have some for your 2.5s but I was sol with the 2.0

 

WTT:
https://portland.craigslist.org/yam/cto/d/trade-for-pickup-toyota-4x4-or/6691826322.html

 

LOL

 

What are those? Shock tower gussets?

 

yep double shear gussets for the shock tower.

 

Regarding a down blanket..

Question:
Any info on down sourcing?
Answer:
The down is from ducks. Don't worry, no ducks were harmed while harvesting the down. There's just a whole flock of bald ducks somewhere in China walking around humiliated.

 

Why you buying duck blankets

 

Shame on you