1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

New to changing out tire/wheel and have some questions.

Discussion in 'Wheels & Tires' started by Nixinus, Sep 17, 2018.

  1. Sep 17, 2018 at 12:56 AM
    #1
    Nixinus

    Nixinus [OP] Well-Known Member

    Joined:
    Jan 11, 2011
    Member:
    #49100
    Messages:
    1,513
    Gender:
    Male
    Oregon
    Vehicle:
    2010 4x4
    Hey guys, how you doing?

    Im going to preface this with "I have searched for some time now and I have a good idea of what I want". This thread is to start a discussion about an issue I have and if going with this setup will help.

    Relevant upgrades:
    -Toytec boss 2.0 at 2.5 inches
    -SPC upper control arm, camber is about in the middle of the slot
    -2nd Gen TRD Sport

    I want to put 265/70/17 Cooper AT3's on. Currently I have Michelin LTX's in a 265/65/17. I have about a half inch between the tread and the UCA. I also have about 3/8" between the sidewall and the little nub thingy that protrudes out of the spindle. I am worried that the Coopers will rub on the UCA and spindle.

    I'm thinking of getting the TRD PRO 4runner wheels because of the offset. Does anyone here run those wheels with the 265/70/17 coopers and SPC UCA. I am concerned about the height and the side wall lugs of the Cooper tread.

    I welcome any other suggestions. If I am going to get wheels, I would like to get something matte black in a 17".
     

Products Discussed in

To Top