Steering wheel shake

I have a 2017 Tacoma. I put 11/2" off set wheels , then then front end started to shimmy. Took it and had the front end aligned and tires balanced . This helped a lot , but it shimmys some at interstate speeds . Any solutions?

 

If your wheels are not hub centric you may need hub rings possibly. Also from years of experience from working at a tire shop Toyota’s are tricky to get balanced specially with aftermarket wheels.

 

Make sure you have the right lug nuts.

 

Check for rocks/gravel in the tyre treads. had this happen a few times with me.

 

Wat

 

New tires and new wheels. Vibrated bad put in hub rings smooth sailing now.

 

Interesting

 

Extremely. Especially since 3rd gens come stock with mag style lugnuts

 

I installed aftermarket wheels. With a 110 bore. So the rings center the wheel before you tighten the lug nuts.

 

With proper torque pattern this should be unnecessary

 

Youre right it should be. But I watched 3 different people do it to no avail. Star pattern and everything. Put rings in and it worked.

 

Don't most aftermarket wheels require different lug nuts? Mine do.

And the rings are 100% necessary if the bore isn't 106 and you don't want it to shake.

 

Yup different lug nuts.

 

I have 4mm spacers for my aftermarket wheels. I would never try running them without it.