Bilstein 5100's and OEM 885 or 887

No blocks needed

 

Cool.... thanks for that info

 

no problem > i think this is the best way to go if you are looking for a good lift not to much and a better ride. I did a pro comp 3 inch lift with leafs and blocks on my 2016 double cab and it did not ride as good as this 2018 truck does its like night and day and saving money also

 

Do these measurements sound correct... I do have a heavy bed mat and oem bed cover on the rear

Tried to measure from the bottom of the fender flare to the center of the wheel on flat ground with a mostly full gas tank


DF ... C of hub 20 5/8

DR ... C of hub 21”


PR... 21.5.

PF ... 20 7/8



C- 20 5/8 ..... C- 20 7/8
C- 21. ..... C- 21 1/2

 

So with these measurements would I not be better off just going with stock springs and maybe setting the bilstein to #2 and then when my bumper comes I am level or just slightly raked? But with bilsteins all around it will ride better and handle rougher road firmer and smoother-

 

Same set up for me. I threw a 1/2 block from toytec. Almost perfect