What Have You Done To Your 2nd Gen Tacoma Today?

I don't know what you mean by "full sized" but I did 2 42" gun cases

 

double shears just act as two points to strengthen how the uca mounts as well as a gusset for the shock bucket. Without it your uca is just held by the shock bucket alone.

 

Modified my CBI Offroad Moab 2.0 with some antenna brackets on the top hoop. Here it is with my VHF antenna mounted. CB antenna will be mounted this evening. I like having them mounted up fron. Gives me a clearance marker as well as being able to watch my antennas clear overhanging branches and other things. Definitely not for everyone, but it works for me.

 

Try craigslist,

 

Well, I did a thing this last weekend. 315/75/16s all around. Cut 2” out of flares and 2.5” out of fenders. CMC (might need more so didn’t weld the plates yet). Beat the hell out of the pinch weld and a few coats of rubber under spray.

Haven’t had time for flex test. I’m currently rubbing the fronts of my UCAs at full lock . Ordered some 3/4 Boras. I have 16x8 “ultra wheels”. Bought them used years ago and can’t find the specs! I’m guessing 4.0 backspacing since I need them to scooch out a little?

Gears are in my future. 4.56 perhaps?

Also I have a 2” lift

Anyone else who has boras: did you have to wait like 15-20 days for shipping?

 

Maverick Powdercoat has a set of red powdercoated Ray-10s that made me seriously think hard about it.

 

Oh hell I’d rock those in a hot minute

 

Those are sweet!

 

IMO 4 bs is ideal for 315s. I rub my UCAs a tad, don't care. Bora is usually at least a week out since they build to order almost everything. Lucky me, I don't have to wait on shipping since I work like 2 miles from them. I run spacers on my crawler not my taco though.

 

@Coot83

 

But the gold looks so good on the brodozer!

 

Red/red might look good. But depends if it matches.

 

https://www.tacomaworld.com/threads/custom-trd-method-nv-center-caps.513587/

 

Thats sweet!!

 

Haha I saw that somewhere else recently. I got to admit man it is tempting, should powder coat yours white!

 

You know I would appreciate the matchness, but honestly if it wasn't that would still be fine with me. That is a pretty color for a ray and damn rare.

 

Is there a bottom sliding rail for the bars? If so, how did you mount it? I also have an Access Roll-Up and have been trying to figure out a way to add a sliding rail that has a strong base for a bed rack or basket. There is a guy that made a bed rack for the Access Roll-Up, which had to be modified. I believe it was a "one off" though. Let me know. Thanks.

 

SCS just released a limited run of the white again. 17x9 -39 offset. Too much for me

 

The universal rail is bolted to the top of the bedside, the thule bases slide to any location. You can also do yakima... any foot base that attaches to the universal rail