What Have You Done To Your 2nd Gen Tacoma Today?

Well, maybe I stand corrected. I wonder if @wmg had to move that or not.

 

yes it relocates to the new battery holder (tray with supports) that comes with the kit...

 

in the instructions that came with the kit...very simple..1 relocate to tray and drop tray in place

 

https://www.tacomaworld.com/threads...them-multiple-batteries-thread.295653/page-48

a pretty good article posted here

 

I have 2 questions. First why the second battery ? Lights, amps ?? Also, anybody have an idea what temp differentials should run ? Thanks in advance

 

Replaced my stock wiper blades for RainX Latitudes. Stocks lasted 5 years. Are the stocks worth anything?

 

Winch, fridge.....all of the above...

 

I replaced my blower motor resistor last week and replaced my wipers and cabin air filter yeterday.

 

After going back and forth on wheel choice found a deal on eBay.

 

Installed a dash mount for my ham radio and whatever else I feel like mounting to it in the future. Turned out good for a DIY project.

 

Which mount is that? at least the part that is bolted to the console?

 

This mount is similar to one I saw on here. Not sure of the name they have for it. But I basically cut some 3/8" x 2" steel bar stock, cut it out with my band saw, drilled the mounting holes and the drilled and tapped the holes for the ram ball. Nothing really extraordinary. I just didn't want to spend 65 bucks for a pair when I only needed one side.

 

Seems simple enough. Now all I need is the equipment, knowledge, and skill to fabricate it...

 

Mine has a cover. Still loud.

 

Wet sanded and cleaned up the windows and headlights today. Truck looks brand new!!

 

Details on the process?? I need to do this bad.

 

There are quite a few videos on Youtube that show the process. It's time consuming but it helps the paint immensely, especially if you're going off road a lot. Just search it on Youtube and follow the process and take your time it will be worth it in the long run especially with how the paint is kinda faulty on some of these trucks.

 

Here's a good one
https://www.youtube.com/watch?v=aJLMN15Lb2Q

 

What started out as a 10 min. job, cost me 2 hrs. of my day off!! I had to drill out the shitty painted over star/hex bolt on the tailgate that stripped on my first f'n tug..WTF!!! Have to guide the tailgate support to fit in a certain spot so it closes but all in all, I like it.. it's BEER 30!!!!

 

Cmc’d cmc Passenger side done! On to driver...