Fabricator needed

I am in need of a fabricator for a SUA install, Shock relocation install, Bump and strap install.

I have all the parts, just need somebody to set and burn the stuff onto my truck.

This is sort of a rush project to make a trip date, I need to get this done by the 15th.

Anybody willing to help me out or point me into the right direction?

 

@glorifiedwelder
@Yotamac
@Shmellmopwho

Anyone of those three guys have the ability to do it for you. It’s just a matter of if they have the time to fit your schedule.

 

Thanks Serg. I’ve quoted this job already. As a general full of thumb I wouldn’t be able to fit a job this big in on short notice but I’ve been communicating with the OP for a while.

Also for anyone looking to take the job on, they builder will need to do a little more than just burn everything on. OP wants suspension broken down a cycled, so you’ll need to drain and refill the shocks and bumps, and bump stop mounts will also need to be fabricated. Shocks being used are also 14” so lower mounts may need a little extra love. Good luck to the OP I look forward to seeing an Archive garage SUA kit installed.

 

You also may want to try demello, I know they have been known to do Bamf relocations in the past

 

how about pelfreybilt

 

Hahahaha

 

did you try DMZ?

 

I have not. Just sort of started shopping around today. Given its Sunday, I wasn't expecting much for replies or shops to be open to ask.

 

Don’t forget @Speed Freek as well