35 on 6” Tacoma

Trying to lift my truck 6” with 35s. Besides the regear what else are required to do to be able to put 35s on 6” lift.

 

• front wheel bearings every 30k
• put bigger tires on
• continue down the rabbit hole

 

Don’t listen to them. I actually just did this to my truck. I’m running BDS 6” Coil-Over Suspension System with 35”. I absolutely love it. I have the 4.88s but that is it. I currently am rubbing when I turn sharp but my front end is down about an 1” from the Rear so this week I will be having my coils cranks up another inch to level my truck out. I’m pretty sure that will take care of everything but if not, I did get the CMC brackets that I can have done as well as the punch welds. However, I don’t think I will have to do any cutting or anything. When I get my ride height adjusted, I will let you know what my total ride height is with my 35s. I would say if you are getting the 6” lift and only going to be at 5”, then you will definitely have to cut

 

Nah dude, leave it! Better MPG's

 

Hold that steering wheel tight bump steer is gonna be a bitch!

 

Don't need 6" to run 35's.

Here is a Tacoma with 35's on 3" of lift...

 

That’s about all

 

Yeah. True. You just need to cut the sh** out of your truck. Lol looks badass tho.

 

In for the sheeet show.

6” and 35” here. For what I do it’s perfect. Not everyone will agree. CMC and massaging of the liners was needed.

 

Nope. Just the CMC and heat gun to the fender liner.

 

You forgot the New front bumper because if you had the stock bumper you would have to do even more cutting

 

orrrrr consider this.. most 35's are 34.5-34.7 tall, you could run a toyo open country mt 255/85r16 that is 33.5 tall with a simple 3 inch lift and zero cutting and chopping... i realize that may not be enough for a lot of ppl in the i wanna look cool dept, this dept is most common over actual function..! another option with the 3 inch lift is 285/75r17 that area actually a true 34, and only 11.5 wide, really a much better fit and performer on tacoma trucks. that is all!!!!

 

wait i lied there is more! there are a few 285/75r18 tires to be found, they're a full 35 tall and still only 11.5 wide!

 

It's the width that gets you...

 

That's what she said.

 

And offset...

but yes it's girth, I mean width, that really matters.