New Switch Pros 9100 Switch Panel!

PRODUCT OVERVIEW:

Features:

• Eight user-programmable switches
• Four 35A circuits and four 18A circuits, with over-current and short circuit protection
• Waterproof, Solid State 125A Power Module
• RGB Backlighting provides unlimited color options, using Color Picker on App
• Daisy Chain up to 3 Switch Panels to One Power Module





Switches can be programmed for:

- On/Off or Momentary
- Ignition or Battery Input
- Flash or Strobe, with User-Selectable Strobe patterns and One Touch activation
- Memory Function
- Master Mode, with ability to turn multiple outputs On AND Off with one touch
- Automatic Power-Up upon vehicle start up
• Two External trigger inputs can each activate up to four outputs (Active Hi or Active Low)
• Lighting outputs can dim from 100% to 10%, with ability to dim during Flash or Strobe patterns
• Sleep Mode for minimal power consumption
• Color Coded Output wires
• 100 User-selectable switch legends
• LED Input Status Indicators for easy troubleshooting
• Time Delay Off function available for all circuits
• Splash proof switch panel with Polycarbonate overlay faceplate
• Program and control the system from switch panel pad or smart phone
• Bluetooth interface with FREE Apple or Android App
• Battery Voltage Readout on App screen
• No Fuses or Bulky Relay box
• Built-In Bluetooth Module

Switch Panel Specs:

• RGB Backlighting provides unlimited color options, allows for exact matching to factory dash lighting
• Built-In Bezel Style Switch Panel enclosure measures 4” L x 2” W x .375” H ; includes concealed mounting hardware for factory-look installation
• Orange LED switch indicators
• 100 User-Selectable Legends

Power Module Specs:

• 8 Outputs: 4 rated @ 35A, 4 rated @ 18A
• 125A maximum rating
• Waterproof and Solid State
• 6”L x 3”W x .5”H (excluding connectors)
• LED Input Status Indicators for easy troubleshooting
• Underhood rated 125°C to -40°C

Kit also Includes:

• 11’ of Communication Cable between Switch Panel and Power Module
• Color Coded Output wires
• Wire harness with Waterproof, sealed automotive grade connectors
• Power Cable with 125A inline fuse


http://store.sdhqoffroad.com/switchprossp91008-switchpanelpowersystem.aspx
THESE ARE IN STOCK AND READY TO SHIP!

Don't forget to check out our Tacoma Switch Pro Mounts as well!
16+ Tacoma Keypad Mount - http://store.sdhqoffroad.com/16-currenttacomaspecific8-switchpowerpanel.aspx
Under Hood Module Mount - http://store.sdhqoffroad.com/05-currentswitch-prosunderthehoodpowermodulemount.aspx

 

Just by reading the specs these are amazing. If I already have the 8100 can I just buy the 9100 panel and swap it?

 

The whole unit is complete different, so it is not swap-able

 

that daisy chaining option is cool.

 

are the mounting points the same for this and the sp8100?
i just started wiring up my year old sp8100. but might consider this.

i changed some stuff around.. because the sp8100 couldn't handle certain loads hah.

 

PM sent.

 

I just got my 9100, and the mounting points are the same as what was pre-drilled for the 8100 in my powertray. So yes.

 

Just ordered. Thanks! Finally get to clean up my wiring and not have multiple wires running into the cab.

 

I think this option is pretty cool as well. I was wondering if you could give me another example as to why one would need two or three panels for one power module? I get having one panel in your truck and maybe one in the bed of the truck in case you are camping or whatnot, but is there another reason someone would need to have two or three panels to turn on and off the same 8 Switches? Plus it has Bluetooth so why wouldn’t one just connect via Bluetooth. Just trying to understand the daisy chaining option a little better.

 

That's a good question.

I would say different settings such as strobe effect vs just being on/off or adding a momentary depending on your needs so that's 2 functions for the same button or even 3.

Bluetooth can work as you mentioned but I don't think you can have your phone and say handsfree at the same time. I know you can have streaming music separate (audio) and handsfree audio separate. Also you would have to unlock your phone/wake it up then open the app, be sure it's connected (I think there's an auto connect though) then push the buttons for your function. That's a few more steps than just pressing the 2nd module once.

Come to think about it using the phone you'll have to look where you're touching. The module you could almost get away with feel or muscle memory touching the switches.

I'm sure others can chime in with other ideas.

 

Thank you. I was just curious and trying to learn all the new features so I know exactly what I’m looking for in my setup. Thank you for getting back to me

 

no problem.

 

2 Awesome products

 

Just ordered. Thanks!

 

Where does this mount. Can you post a pic? Could be wear I mount my second switch pro. First one I mounted under my emergency brake to use up blank space. Fits perfectly.

 

how much can I get the switch pros

$659 sp9100 switch pros SP-9100 8-switch panel power system with concealed mounting hardware

sp9100 and the planes for 2017 Tacoma with rear sliding windows can you give me a quote to 92504 thank you PM

 

so is there any good instructional on installing it on a 2016+ tacoma? im trying to figure out the best mounting points in the engine compartment but dont know what an ideal set up would be like

 

We make mounts for both the keypad inside the truck and a module mount for under the hood. Links below. But the installation is pretty straight forward per their wiring instructions!

Interior:
https://sdhqoffroad.com/collections...-power-panel-with-concealed-mounting-hardware
Under Hood:
https://sdhqoffroad.com/collections...switch-pros-under-the-hood-power-module-mount

 

Is it possible to have a switch enable/disable an output triggered by an input? I would like to trigger my LED bar from the high beam switch, but be able to disable with one of the switches. Possible?

 

Bump?