AZ BS Thread 4.2⁰

It goes inside a coil pack connector. I do not know what they are called.

 

Thanks brotha. I figured you would have some advice. I have replaced the other five and of course the last one, I flip flop 2 of the wires and now I can't get them out. The old connectors just broke away so I didn't really have to de-pin. Anything.

 

Gotta love old dried out plastic clips.

 

Looks really similar to a westherpack. I bought a depinning tool set on ebay before. Might want to look at that.

 

Well I bought all of these but must be totally incapable of being able to get them to work.

Bonai us Automotive Tools... https://www.amazon.com/dp/B07C6ZJC4R?ref=yo_pop_ma_swf

Extractor Tool and Picks...

$10 Pico 0660PT Car Electrical Connector Extractor Pin Removal Tool Set

https://www.amazon.com/dp/B0002JMYKS?ref=yo_pop_ma_swf

 

I use needle nose pliers and then solder. Pain in the ass but it works.

 

Why in the hell didn't I think of that!! Thanks mang.

 

Usually they have 4 studs not bolts.

 

Since the fan clutch has U shaped openings for the bolts. Can you put a longer bolt at the top of the water pump and pulley to hold it in place. Then slip the fanclutch under the bolt and on. Then start the other 3.

 

interesting.. These were 4 bolts that went through from the fan clutch side.

hmmmm.. that could have possibly worked. I already pulled it out and order another OEM Aisin one. I also ordered an OEM water pump and Thermostat. Should be here Friday. Might try and do it all this weekend, including a Coolant flush.

 

I ALSO just realized that there's a notch with a removable filler piece at the bottom of the fan shroud.. which looks like its meant to allow the shroud to be installed (and removed) while the fan assembly is bolted up... that should make it a hell of lot easier.

I think I was struggling due to that. Since I didn't want to remove the upper coolant hose and worry about coolant, the only way the shroud would come out with said coolant hose attached, was rotating it and swinging it out. A move that would not be doable with the fan there. When I disassembled it, I pulled the fan and clutch out together, just wiggled it out between the shroud and Radiator. So when everything arrives, I'll try it all again. Minitruck lesson #1...

 

Yeah, that one on the keyring is the one I have. It's a pain in the ass trying to figure out if it will work.

 

Added 3.5” speakers to the tweeter location, what a difference still have to really tune but wow

 

It’s dead as f*ck in here I miss the fallen homies! saw some action on az4runner with Sdhq what a shit show, funny people are so quick to bash but never once asked the guy if he installed them correctly or hear the other side lol

 

@snowsk8air2
These are the only ones I have that doesn't have a bumper on it.

 

They were all a bunch of ass holes that got what they deserved. This is a wholesome site that doesn't need their shenanigans..............

 

Thanks. She has decided she wants to go 285's. Just need to pick a tire now.

 

Well that’s the way the mods feel so it must be right... do you have a coupon for this buy or do I have to sign up for the $50.00 off with the Amazon card?