Custom Switch Panels

@mesojdm Which model is this one? I’m not seeing it on the first page. The top row is for larger switches, right?

I think it’s exactly what I want. I want to move my “?” switch to the top row and add a couple more down below.

 

Where can I get this? Looking for 3L and 1S just as pictured

 

Slowly getting them added. The Lower panels are listed
https://mesocustoms.com/collections/switch-panels/products/tacoma-lower-switch-panel

I think I still have the file for that one.. I'll have to dig though my computer

 

Cant wait for the CP4P model to be ready again. Been staring at the hole in my dash for way too long.

 

Have you made any of these with the 5 tall up top and keeping the bottom like stock? Would really like to get one.

 

I’m in for this if you make a batch!

 

Where are you guys getting blanks for the unused slots?

 

https://www.ch4x4.com/product/ch4x4-rocker-switch-blank-cover/

Just make sure you get the right size. There's a large and a small depending on which blank area you have.

 

@mesojdm makes and sells them as well in both sizes. It looks like he is currently out of stock, but just have a bit of patience as he is slowly adding things to his website. He's getting his site and business up so you just have to be patient.

 

@mesojdm sells blanks.

 

Shit I forgot about the blanks. Was moving all my stuff into the office today and I stuombiyed upon a box full of blanks. I’ll have to get them listed on the website

 

Awesome what size should we order for the overhead and center console openings.

 

The blanks rock, esp since both button sites don't have garage door opener ones.

 

ok, I'm confused. can I use the three spare slots in my oem panel under the radio? or do I need something to add switches to that. it looks like 3 blanks in there, is there not?

 

All of @mesojdm's panels are to replace the factory ones as they don't have nearly enough blanks for multiple accessories.

 

when can we order the blanks? What size fits the center and overhead console?

 

Those of you looking for the SwitchPro Mount setup. If you need it quick and can't or don't want to wait. SDHQ OffRoad also sells one.

Personally, I'd rather support Stew and his work, but if I can't get one soon I'll just have to go this route.

https://sdhqoffroad.com/collections...ealed-mounting-hardware?variant=6913171750947

 

@mesojdm any luck digging through your computer?
Either the one with four or five up top works for me.

 

Still checking often looking for the CP4P to come up available. Going to look great wants its all wired up

 

@mesojdm I bought the LSP7 (order 2878 ) and the top half of the part has a very nice even sheen to it but the bottom half of the piece is very dull and has no sheen to it. I was wondering is there something you recommend to get the sheet back?