What Have You Done To Your 3rd Gen Today?

Welcome to TacomaWorld!

 

What a pain! Luckily I didn't have a problem with flats, just losing chunks of rubber.

 

First of all welcome to TW. As far as mods go just by doing the phone clip and logging in to this site you've opened Pandoras Box or to put it another way ....., you're screwed! There's no turning back now, you're doomed and will now suffer the same fate as the rest of us
Congratulations on owning your first and probably not your last Tacoma.

 

hauled home a hay bale for my wifes yard display.....guess I'm an official cowboy now...

 

OMG if that's all it takes I must be Hopalong Cassidy!
Welcome to the herd!

 

Good choice, love mine! Welcome to TW.

 

I recently had one installed on my truck and to save you a very expensive repair, be very careful when you enlarge the drain holes for the drain hoses because the fuel fill hose is close underneath the bed on the drivers side right beneath the existing drain hole. I know because the place that installed mine accidentally drilled into my fuel hose and it took me on a week long head scratch before I took it to the dealership who identified and replaced the hose for $583. Luckily the shop that installed the cover covered the repair costs because it was technically their fault. I hope this helps and good luck. I love my cover, though dont expect it to be water tight.

 

Depending on what size beer

 

Just installed a

$150 Rexing V1p 4K Car Dash Cam 2.4" LCD 2160p Front + 1080p Rear Wi-Fi 170° Wide Angle Dual Channel with Rear Cam, G-Sensor, WDR, Loop Recording Mobile App Supercapacitor

Rexing V1p dash cam (front and back recording). Very easy. Used a Shapeways.com clip adaptor installed on the GoPro mount to mount the Rexing camera.

 

Didn’t find it necessary to use the drain hoses. In conjunction with the OEM bed mat any water that does get in is negligible. For the most part any water that gets in is through the tailgate from the "undercarriage wash" at the laser wash I patronize. There are also two very small gaps on each siderail by the bulkhead behind the cab. A small piece of adhesive backed gasket left over from the installation remedies that issue.

 

Damn, I've done some serious digging for a product like this (also have a Rexing S1, but looks like it will work). You sir get 1000 internet points today!

https://www.shapeways.com/product/P...unt-best-way?optionId=63619415&li=marketplace

 

I like the way you think!

 

I did the same thing this morning. But I got the rexing v1LG. It uses a different mounting system than the v1p so I was not able to use the shapeways mount. But, I took part of a gopro extension, cut part off and epoxied it to the rexing mount. Mine doesnt sit as close to the windshield as yours does with the shapeways mount

But, its best place to mount a camera on these trucks and it works.

 

My worst vice next to spending money on my Taco! Damn Irish lineage!!

If you haven't tried Sam Adams Octoberfest I encourage you to try it.
Super smooth Marzden and it blows all other Octoberfests I've tried out of the water. Time is almost up to get it, it's getting hard to find!
Applebee's still has it on tap. A great dinner beer.
Get the "Brutus"!

 

Thanks for the heads up!

 

How do they handle so far? Truck looks nice.

 

Joined today and over 40 messages. I'd say "Welcome to TW" but you've made yourself at home.

 

Plasti Dipped my wheels today. Weather is too nice not to do something and buying brand new wheels is out of the question lol.

Any tips on how I can plasti dip the chrome "TACOMA" lettering?

 

Wheels look great!