Plasti dip rear bumper caps

Should I remove the caps to plasti dip them or should I just try and put paper around the edges. Thank you

 

I did mine in place. Pretty easy to tape off and spray if you have a semi-protected (dust free) place to do it.

 

I might do that. Do you have any pics of your results?

 

I just did mine but with flat black tremclad spray paint. Looks good but I had a little running which I’ll have to redo and add another coat. I just masked off and did them in place. You could do the same with plasti dip or add 2” around and peel. Looks good, I have the colour matched caps and flares. Also , peeled the TRD sport stickers and looks way cleaner. IMO.

 

I just got these in gloss black. High quality.

https://www.ecoological.com/store/p52/2016-2019_Tacoma_GEN_3_Rear_Bumper_Covers.html

 

I second this. I came in here to post exactly this. Amazing, there is also this thread: https://www.tacomaworld.com/threads...olor-suggestions.559617/page-19#post-18877079

for upcoming group buy.

 

Wonder if I can get a refund on the difference if the group buy happens

 

Easy to tape off in place. This is 8 layers and then 3 layers of plasti dip glossifier.

Obviously the other black trim is still dirty, but this matches very well imho.

 

I read that the gloss black caps are not the color matched Midnight Black Metallic that's on the 3rd gens. If you have a black 3rd gen would you mind posting a pic of how the gloss black looks up against the metallic?