JTA Metalworks on my 2017 sr5 4wd

2017 DCSB sr5 4wd with 2100 miles as of the morning. I'm only getting started but it's moving along quickly! Thanks to some great guys!

I sent my truck down to Jeff @jeffz0rz @jtametalworks in El Cajon and sent him some pix of what I wanted done on my truck. Jeff built a prerunner style front bumper with winch integrated in the front and a hybrid high clearance rear. Thanks for the job well done!

Before I sent it over to him I did a basic 5100 front and rear lift with the fronts set at 2nd from the top on my sr5 stock coils and a 1" rear block with the 5100 in the back. Also running 265/75/16 Toyo at2 and 1.25" spydertrax spacers. Other armor includes a Pelfrey ifs front skid. Have an RCI diff skid and Shmellfab's sliders going on this week!

My lights are Light Force 80 led spots on front with GG amber fogs. GG sidewinders on the A pillars. In the rear bumper GG combo and dust cubes. @GGlighting had some good suggestions as far to get some good lighting for the trails and Jeff made the brackets.

The only exterior mod I did was remove the side badges and add a RAD Industries grille. And some DDM tuning LED head lights.

Inside I'm running 2 Alpine PDX amps, type all around and a DD 8" sub in a ported box.

All of Jeff's plates were cut on an automated plasma table and mig welded. All tubing used was 1 3/4 dom and 3/16 plate. D ring mounts x4 and hitch (not rated yet). Still need to figure out a flip up rear tag and some other minor additions!

Sorry the truck is dirty I couldn't resist running it through Deep Creek with some friends yesterday!

Enjoy the pix.

 

How much did he charge you for the prerunner front bumper?